Bambu Lab AMS Lite vs AMS 2 Pro: Which Multicolor Unit Fits Your Printer
Owen Hartley
November 21, 2026
You own a Bambu Lab printer, or you are about to buy one, and you want multicolor or multi-material printing. Bambu sells two main four-spool units, the open AMS lite and the enclosed AMS 2 Pro, and the price gap between them is large. A year ago the choice was mostly made for you by your printer model. That is no longer true for A1 owners, so it is worth checking what each unit actually does before you spend the money.
This guide answers the questions buyers usually ask, in the order they tend to come up, using Bambu Lab’s store listings, wiki and official forum announcements. Prices and compatibility change with firmware updates, so check Bambu’s current product pages before you order.
Which printers can use the AMS lite, and which can use the AMS 2 Pro?
This is the first question to answer, because it rules options in or out before anything else.
AMS lite works only with Bambu’s A-series bed-slinger printers: the A1, the A1 mini and the larger A2L, which launched in June 2026. Bambu’s store states that it is not compatible with the X1 and P1 series, and it is not used on the CoreXY P2S or H2 machines either.
AMS 2 Pro works with a much wider range. Bambu says it is compatible with its consumer printer lineup: the X1 and P1 series, the P2S, the H2 series, and now the A-series too. Some combinations need extra parts:
- X1 and P1 series: feeding works with the included cable plus a Filament Buffer or AMS Hub. Drying requires a separately sold Switching Adapter that powers the heater. Retailer listings note that drying is not yet supported on the X1E.
- P2S and H2D: the printer can power one AMS 2 Pro for drying directly. Each additional unit that needs to dry at the same time needs its own Switching Adapter.
- A1 and A1 mini: support arrived with A1-series firmware first released as a public beta in October 2025. It requires the AMS Hub for the A1 series, a separate accessory, and drying again needs a Switching Adapter for each AMS 2 Pro.
- A2L: Bambu says it supports up to four AMS units plus one AMS lite at the same time.
If you have a P1S, P2S, X1 or H2-series printer, the AMS lite is not an option, and your real choice is between the AMS 2 Pro and the single-spool AMS HT covered below. If you have an A1 or A1 mini, both units are now available to you.
How many colors can you run with each?
Both units hold four spools. The difference is how far you can expand.
On an A1 or A1 mini, Bambu’s store says only one AMS lite can be connected, so four colors is the maximum with that unit. The A1-series AMS Hub can connect up to four AMS units at once, in any combination of AMS, AMS 2 Pro and AMS HT, for up to 16 spools from the four-slot units. Bambu’s A1 firmware notes say AMS lite cannot be mixed with the other AMS types on the same A1 printer, so if you upgrade, the AMS lite comes off.
The A2L is the exception. Bambu lists it as supporting up to four AMS units and one AMS lite together, for up to 19 colors.
On the X1, P1, P2S and H2 printers, an AMS Hub links up to four AMS units for 16 spools. Bambu’s store says that on setups that support it, you can chain up to four AMS 2 Pro and eight AMS HT units for a total of 24 filaments.
In practice, most people print with four colors or fewer. Every color change also purges filament, so a model with many colors uses more material and takes longer, whichever unit you use. Purge volumes can be tuned in the slicer, and our OrcaSlicer vs Bambu Studio comparison covers how the two handle multi-material settings.

Can either unit dry your filament or protect it from humidity?
This is the biggest practical difference after compatibility.
The AMS lite is an open design. The four spools sit on exposed rotary holders, so they are in contact with room air the whole time. There is no lid, heater or desiccant chamber. That is fine for PLA in a moderately dry room, but moisture-sensitive materials will pick up water if they stay loaded for days, and you will need to store and dry them separately.
The AMS 2 Pro is a sealed box with a built-in dryer. Bambu lists a maximum drying temperature of 65 °C, active moisture venting, a rotating drying mode that turns spools during the cycle, and temperature and humidity sensing visible on the printer screen, in Bambu Studio and in Bambu Handy. A few limits apply:
- It cannot dry standalone. It must be connected to a printer, and on many printers it needs the Switching Adapter for power.
- 65 °C fully dries PLA, PETG and several Bambu fiber-filled materials. Bambu says it cannot completely dry materials that need more heat, including ABS, ASA, PA, PC, PVA and TPU for AMS.
- Bambu’s wiki notes that when a unit without an external adapter dries while sharing printer power, drying power is reduced and results may suffer.
For drying temperatures by material, and how AMS drying compares with a dedicated dryer, see our guide on how to dry filament.
Which filaments does each unit accept?
Bambu publishes compatibility lists for both. They overlap a lot, with a few important differences.
AMS lite, per Bambu’s store listing:
- Supported: PLA, PETG, ASA, PET, PA, PC, PVA and BVOH (only when dry), PP, POM, HIPS and Bambu PLA-CF.
- Not recommended: Bambu PLA Glow, Bambu PETG-CF and generic glow-in-the-dark PLA, which can cause loading errors and faster wear.
- Not supported: TPE, TPU, wet PVA or BVOH, Bambu PET-CF, PA6-CF and TPU 95A, plus other brands’ carbon- or glass-fiber filaments.
AMS 2 Pro, per Bambu’s store listing:
- Supported: PLA, PETG, PP, PLA-CF, PAHT-CF and PETG-CF, plus ABS, ASA, PET, PA, PC, PVA, BVOH, POM, HIPS and TPU for AMS. The second group feeds normally but needs hotter drying than the unit provides.
- Not supported: TPE, generic TPU, damp PVA or BVOH, Bambu PET-CF, Bambu TPU 95A, and carbon- or glass-fiber filaments beyond the listed Bambu CF types.
For the AMS 2 Pro, Bambu specifies ceramic filament inlets rated at 1200 HV, which helps with the mildly abrasive CF filaments on its supported list. Neither unit is meant for other brands’ fiber-filled filaments.
What about TPU?
Soft TPU is not supported in either unit; it buckles and jams in long feed paths. Bambu makes a stiffer filament called TPU for AMS for its feeders, which appears on the AMS 2 Pro list and which retailers list as compatible with the AMS lite as well. For softer TPUs, bypass the AMS and feed the spool directly into the printer from an external holder. Our guide on how to print TPU covers the settings.
Will cardboard spools work?
Bambu specifies spool sizes rather than spool material. The AMS lite accepts spools 40–68 mm wide with a 53–58 mm center hole. The AMS 2 Pro accepts spools 50–68 mm wide and 197–202 mm in diameter. Many cardboard spools fit those dimensions, but cardboard edges can shed fibers and slip on drive rollers, and cardboard swells with humidity. The community has designed many printable adapter rings that cover the edges of popular cardboard spools for both units. Check the dimensions of your specific brand before buying an adapter.

How do the hardware and size compare?
The AMS lite measures 397 × 208 × 342 mm and weighs 1.6 kg according to its spec sheet. It is tall and narrow, with spools standing upright on rotary holders mounted on a stand. The open design makes it easy to see how much filament is left and to swap spools.
The AMS 2 Pro measures 372 × 280 × 226 mm and weighs 2.5 kg. It is a low, wide box that usually sits on top of an enclosed printer. Bambu lists a brushless servo feed motor that it says feeds 60 percent faster, and tool-free access to the PTFE tubes from above.
Both units read RFID tags on Bambu Lab spools to set the material and color automatically. Third-party filament works in both, but you set the material type manually in Bambu Studio or on the printer.
What do they cost, all in?
Prices vary by region and promotions run often, so treat these as snapshots from late 2026:
- AMS lite: about $199 standalone at US retailers. In a combo, it costs less: Bambu lists the A2L at $469 and the A2L Combo with AMS lite at $569, a $100 difference.
- AMS 2 Pro: Bambu’s US store has listed it at $379 against a $424.99 reference price.
- Extras for AMS 2 Pro: the A1-series AMS Hub lists at $19.99 on Bambu’s US store, and the Switching Adapter needed for drying on many printers sells for $54.99 at MatterHackers.
For an A1 owner, the full cost of an AMS 2 Pro with working drying is roughly the unit plus about $75 in accessories, which is more than double an AMS lite. You do get a dryer and sealed storage in return, which would otherwise cost extra as a separate filament dryer.
Where does the AMS HT fit in?
The AMS HT is a single-spool unit designed for engineering filaments. Bambu lists a maximum drying temperature of 85 °C, high enough for the nylons, polycarbonates and other materials the AMS 2 Pro cannot fully dry. MatterHackers lists it at $209, with sales at $189, and Bambu’s EU store lists it at €149. It can dry TPU, though TPU and some fiber-filled filaments feed through a rear bypass outlet rather than automatically. It is a good partner for an AMS 2 Pro if you print engineering materials, but on its own it does not give you multicolor printing.
Are there third-party alternatives?
The best-known is BMCU, an open-source community multicolor feeder for Bambu printers. BIQU sells a kit version, the BMCU-370, which retailers list as working with the A1, A1 mini, P1P and P1S. It is not a Bambu product, it does not have Bambu’s support or warranty, and users on Bambu’s forum have raised concerns that future firmware updates could restrict it. It may appeal to tinkerers on a tight budget, but buy it knowing it could stop working after a firmware update.
Matching the unit to your printer, room and materials
Choose the AMS lite if:
- You have an A1, A1 mini or A2L and mainly print PLA in a few colors.
- You want the cheapest route to four-color printing, especially as part of a combo.
- Your room is not humid, or you are happy to store spools in sealed boxes between prints.
- You like being able to see and swap spools at a glance.
Choose the AMS 2 Pro if:
- You have an X1, P1, P2S or H2-series printer, where the AMS lite does not work.
- You print PETG or other moisture-sensitive materials and want them dried and sealed while loaded.
- You want room to grow beyond four colors, or you might move to an enclosed Bambu printer later and want to keep the unit.
- You live somewhere humid, where an open spool rack is a constant source of wet-filament problems.
If you are still choosing between the A1 and A1 mini themselves, our A1 vs A1 mini comparison covers that decision. For most A1 owners printing PLA, the AMS lite remains the sensible default. The AMS 2 Pro is worth the extra cost if humidity, engineering materials or a future printer upgrade are part of your plans.