Bambu Lab P2S vs P1S: What Changed and Whether It Is Worth Upgrading
Owen Hartley
November 19, 2026
You either own a P1S that has been printing reliably for a year or two and keep seeing the P2S mentioned everywhere, or you are about to buy your first enclosed Bambu Lab machine and both models are sitting side by side in the store at prices that are closer than you expected. Either way, the question is the same: what does the newer printer actually do differently, and does any of it matter for what you print?
Below are the confirmed differences, drawn from Bambu Lab’s announcements and wiki plus independent reviews, followed by who gains from upgrading and who does not.
Where the P2S fits in Bambu Lab’s lineup
The P2S is real and on sale. Bambu Lab announced it on October 14, 2025, in a blog post describing it as a reengineered version of the P1 Series. At launch, the US price was $549 for the printer alone and $799 for the P2S Combo, which bundles an AMS 2 Pro, both excluding tax, according to 3D Printing Industry’s launch report. European pricing was €519 and €749 including tax. Tom’s Hardware later reported that US stock had arrived after initial logistics delays.
Bambu Lab was explicit that the P2S does not retire the P1S. Its launch post says the P1S will remain available and fully supported, and 3D Printing Industry quoted the company positioning the older machine for buyers who prioritize price or need to match an existing print farm. So in late 2026 you are choosing between two current products, not between a new model and a clearance item.
Prices have moved since launch. A third-party tracker that logs Bambu Lab’s US store (BambuHub) shows typical 2026 pricing of around $399 for the P1S, $549 for the P1S with AMS, $549 for the P2S and $749 for the P2S Combo, with Black Friday 2026 sale prices of $349 for the P1S and $449 for the P2S. Treat those as snapshots: Bambu runs frequent sales, and tariff changes have shifted US prices more than once. Check the official store on the day you buy.
What stayed the same: frame, build volume and core motion
Both printers are enclosed CoreXY machines with a 256 x 256 x 256 mm build volume. The P2S is only slightly larger on the outside (392 x 406 x 478 mm versus 389 x 389 x 458 mm for the P1S, per spec comparisons compiled by 3DMag) and heavier at about 14.9 kg versus about 13 kg. Both top out at a 300 °C nozzle temperature, and both take the same family of nozzle sizes: 0.4 mm as standard, with 0.2, 0.6 and 0.8 mm options.
Anton Mansson’s pre-purchase guide makes a point worth keeping in mind: the P2S’s core mechanics are a refinement of a proven design, not a new kinematic system. Peak speed rises from 500 mm/s to 600 mm/s on paper, and acceleration stays at 20,000 mm/s². In everyday prints, hotend melt rate and layer cooling limit speed more than the motion system does. A reviewer at Hackster reported no major visible difference in print quality between the two machines. If you are hoping the P2S will make your existing PLA prints look dramatically better, the evidence does not support that.
P2S and P1S specifications side by side
Figures below come from Bambu Lab’s launch materials and wiki and 3DMag’s spec comparison. Flow and speed numbers are manufacturer ceilings measured under different conditions, so treat them as rough guides.
| Feature | P1S | P2S |
|---|---|---|
| Build volume | 256 x 256 x 256 mm | 256 x 256 x 256 mm |
| Stock nozzle and extruder gears | Stainless steel nozzle, steel gears | Hardened steel nozzle and gears |
| Hotend change | Screws and connectors | One-clip quick-swap nozzle and heatsink |
| Extruder | Standard direct drive | PMSM servo extruder, up to 8.5 kg force, clog and grind detection |
| Max hotend flow (manufacturer figure) | 32 mm³/s | 40 mm³/s |
| Max bed temperature | 100 °C | 110 °C |
| Chamber | Enclosed, no active heating | Enclosed with Adaptive Airflow, no active heating |
| Cooling for PLA | Door or top lid opened for low-temperature filament | Flap system pulls outside air, door can stay closed |
| Camera | 1280 x 720, about 0.5 fps | 1080p high frame rate live view, brighter LEDs |
| Screen | 2.7-inch, button-controlled | 5-inch touchscreen, second-generation UI |
| Storage | microSD card | 8 GB internal storage, USB drive support |
| AMS support | AMS, AMS 2 Pro, AMS HT: up to 4 units total | AMS 2 Pro and AMS HT: up to 4 of each, 20 slots |
| US launch price | $699 at its 2023 launch, around $399 in 2026 | $549 printer, $799 Combo at its 2025 launch |
Adaptive Airflow and why PLA with the door shut matters
The change most P1S owners will notice day to day is cooling. On a P1S, printing PLA in a fully closed chamber can let heat build up enough to soften filament in the heatbreak, which leads to clogs or extruder grinding. The common workaround, reflected in Bambu Lab’s own guidance for the P1 series, is to prop the top glass open or remove it, or leave the door ajar, when printing low-temperature materials. That works, but it undoes some of the enclosure’s noise and dust benefits.
The P2S replaces that habit with what Bambu calls Adaptive Airflow. A set of motorized flaps lets the printer pull cool air in from outside the chamber when it is running PLA and similar filaments, then close off and recirculate warm air through an activated carbon filter when it is running ABS, ASA or other warp-prone materials. Bambu’s launch post and Anton Mansson’s breakdown both describe this as letting you print PLA with the door closed.
Neither machine has a heater dedicated to the chamber. Bambu Lab’s P2S FAQ states that the P2S has no active chamber temperature function and instead manages temperature with the closed chassis and switching between internal and external air circulation. Retailers describe passive warming to roughly 50 °C. If you want to print nylon, polycarbonate or other materials that genuinely benefit from a hot, actively heated chamber, neither printer is designed around that.

A short safety note: when either printer runs ABS or ASA, the enclosure and carbon filter reduce odor, but they do not make the machine a fume extractor. Print those materials in a room you can ventilate, keep the door closed until the part has cooled, and avoid running them next to where you sleep. See our safety disclaimer for the limits of this kind of guidance.
The servo extruder, hardened parts and abrasive filaments
The P2S uses a permanent magnet synchronous motor (PMSM) servo extruder. Bambu Lab rates it at up to 8.5 kg of extrusion force, which its launch post describes as 70 percent more than its predecessor, and says the motor is monitored at high frequency so the printer can flag clogs and filament grinding as they happen. An eddy-current sensor also handles automatic flow dynamics calibration.
For material choice, the more important change is the stock hardware. The P1S ships with a stainless steel nozzle and steel extruder gears, and Bambu Lab’s guidance for that configuration is that carbon-fiber and glass-fiber filled materials are not recommended until you fit a hardened steel nozzle and hardened gears. The P2S comes with hardened steel parts out of the box, and 3DMag’s comparison lists a long set of supported filled materials for it, including PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PAHT-CF and PPA-CF.
That difference is easy to overstate: a P1S owner can fit a hardened steel hotend for a fraction of a new printer’s price. The hotend swap itself is also simpler on the P2S. Anton Mansson notes that changing the P1S hotend involves screws, wires and connectors, while the P2S nozzle and heatsink assembly release with a single clip. If you switch between a 0.4 mm and a 0.2 mm nozzle often, for fine text or small figures, that is a real quality-of-life improvement.
AMS 2 Pro, AMS HT and multicolor on both machines
Owners sometimes assume the newer AMS units only work with the P2S. They do not. Bambu Lab’s wiki states that P1 series printers support the AMS 2 Pro and AMS HT from firmware 01.08.00.00 onward, and Bambu’s wiki recommends updating the printer’s firmware before connecting an AMS 2 Pro to a P1S. According to MatterHackers’ AMS compatibility guide, a P1S can run up to four AMS units in any mix of the original AMS, AMS 2 Pro and AMS HT, for up to 16 filaments, using an AMS Hub when you connect more than one. The AMS lite is designed for the A1 series and does not work with either printer.
The P2S raises the ceiling. Bambu Lab’s P2S FAQ lists a maximum of four AMS 2 Pro units plus four AMS HT units, eight units and 20 slots in total, connected through the P2S’s own buffer. For most hobbyists one AMS is plenty, so this matters mainly for small print businesses.
The AMS 2 Pro’s drying function is the feature that changes daily life for both machines. It can actively heat and vent stored filament, which Bambu says dries it faster than a sealed heated box. If moisture-sensitive materials such as PETG or nylon give you stringing or brittle filament, our guide on how to dry filament, including in the AMS covers temperatures by material and the limits of drying inside the unit.
Camera, screen, storage and the smaller upgrades
The P1S camera is a 1280 x 720 unit that refreshes at about half a frame per second. It is adequate for timelapses and spotting a detached print, little more. The P2S camera streams 1080p at a high frame rate with stronger LED lighting, and Bambu Lab says it feeds AI detection of spaghetti failures, nozzle blobs, printing in mid-air and mismatched build plates or nozzles.
The P2S also replaces the P1S’s small button-driven display with a 5-inch touchscreen running Bambu’s second-generation interface, adds 8 GB of internal storage and accepts USB drives instead of relying on a microSD card. The bed can reach 110 °C instead of 100 °C, which helps a little with ABS and ASA adhesion on large parts. Sensors listed for the P2S include a door sensor, filament run-out, tangle detection, filament odometry and power-loss recovery.
Noise is harder to pin down. Several reviews describe the P2S as quieter, but published decibel figures disagree widely and test methods are rarely documented. Expect it to be similar or somewhat quieter, not silent.

P1S owners who gain the most from switching
An upgrade makes the most sense if one or more of these describes you:
- You print mostly PLA and are tired of propping the lid. Adaptive Airflow fixes the single most common P1S annoyance, and it keeps the enclosure’s dust and noise benefits during PLA jobs.
- You want to print filled filaments regularly and you would rather have hardened parts, a quicker hotend swap and the servo extruder’s clog detection than retrofit a P1S.
- You leave prints running while you are out and want a camera that shows usable detail, plus automatic failure detection that can pause a job.
- You run several machines or plan a large AMS setup and would use the higher unit count, the internal storage and the touchscreen workflow.
Reasons to keep printing on your P1S
Many owners will be better off holding on to what they have. Keep your P1S if:
- It prints well and you mainly use PLA, PETG, ABS or ASA. The build volume is identical, and there is no evidence of a meaningful quality jump on these materials.
- You want newer AMS features. Your P1S already supports the AMS 2 Pro and AMS HT on current firmware, so you can add drying-capable storage without changing printers.
- You only occasionally print carbon-fiber filament. A hardened steel hotend is a far cheaper fix than a new machine.
- Resale value would barely dent the cost. With new P1S units frequently selling for around $399 or less, a used one recovers only a modest share of a P2S’s price.
Bambu Lab has said the P1S remains supported, and when it retired the P1P and X1 series it published multi-year windows for security patches and spare parts, so there is no immediate pressure to move.
Picking between them as a first-time buyer
If you do not own either printer, the decision comes down to the price gap on the day you buy and how much you value convenience. At typical 2026 pricing the P2S costs roughly $150 more than the P1S, and the combo gap is about $200. For that difference you get closed-door PLA printing, hardened parts, a better camera with failure detection, a touchscreen and an easier hotend swap. For many new owners, the first two alone justify the difference, because they remove the most common early frustrations with an enclosed machine.
The P1S still makes sense if your budget is fixed, you have found it on a deep sale, or you mostly want an enclosure for ABS and ASA and do not mind opening the lid for PLA. If you plan to print outdoor parts, the enclosure on either machine is what makes ASA practical; our article on why ASA outlasts PETG and PLA in the sun covers that material in detail.
If you will print almost exclusively PLA and PETG and do not need an enclosure at all, it is worth comparing both against Bambu’s open-frame A1, which our A1 vs A1 mini comparison covers. Whatever you choose, confirm which AMS version a combo includes and check current prices, because they change often.